Sand for 100 sq ft
At 2 inches deep, 5 percent added.
Cubic yards
0.65cu yd
Tons (approx)
0.88tons
cubic yards = 100 × (2 / 12) ÷ 27 × 1.05 = 0.65
About 9.3 m² at 5 cm.
Open the Sand CalculatorAbout this estimate
This assumes a 2 inch depth, typical for a bedding or leveling layer. Sand runs roughly 1.35 tons per cubic yard, varying with type and moisture.
Moving sand? A wheelbarrow beats a bucket for anything past a bag or two.
View on AmazonAs an Amazon Associate we earn from qualifying purchases.
Common questions
How much sand for 100 square feet at 2 inches?
About 0.65 cubic yards, roughly 0.88 tons, with 5 percent added.
How many tons of sand in a cubic yard?
Around 1.35 tons, depending on the sand type and moisture. Confirm with your supplier.
More Calculators
Concrete New
Enter slab dimensions. Result rounds up with a 7 percent waste allowance.
Gravel New
Enter the area dimensions and depth. Result rounds up with a 5 percent waste allowance.
Mulch New
Enter the bed area and depth. Result rounds up with a 5 percent allowance.
Topsoil New
Enter the area and depth. Result rounds up with a 5 percent allowance.
Paint New
Enter total wall area and coats. Result rounds up to whole units.
Flooring New
Enter room area and the coverage printed on the box. 10 percent waste added.
Tile New
Enter the area and one tile size. 10 percent waste added.
Drywall New
Enter total area to cover. 10 percent waste added.
Paver New
Enter the patio size and one paver size. 5 percent waste added.
Sand New
Enter the area and depth. 5 percent allowance added.
Roofing New
Enter the roof surface area. 10 percent waste added. Three bundles per square.
Insulation New
Enter area to cover and the coverage printed on the package. 5 percent added.
Fence New
Enter total fence length and post spacing.
Sod New
Enter the area to cover. 5 percent allowance added.
Grass Seed New
Enter area and seeding rate. Default rates suit a new lawn.
Fertilizer New
Enter area, target nitrogen rate and the first number on the bag.
Cubic Yards New
Enter length, width and depth. No waste added.
Square Footage New
Enter length and width.
Board Foot New
Enter board dimensions and quantity.
Material Cost New
Enter quantity, unit price, tax and delivery. Figures are in your own currency.